Table of Contents
Advertisement
C
h
a
p
t
e
C
h
a
p
t
e
W
e
b
-
b
a
W
e
b
-
b
a
This chapter instructs you how to configure and manage the switch through the web user
interface it supports, to access and manage the switch. With this facility, you can easily
access and monitor through any one port of the switch all the status of the switch, including
MIBs status, each port activity, Spanning tree status, port aggregation status, multicast
traffic, VLAN and priority status, even illegal access record and so on.
The default values of the managed switch are listed in the table below:
IP Address
Subnet Mask
Default Gateway
Username
Password
After the managed switch has been finished configuration in the CLI via the switch's serial
interface, you can browse it. For example, type http://192.168.1.1 in the address row in a
browser, it will show the following screen (see Figure below) and ask you inputting
username and password in order to login and access authentication. The default username
and password are both "admin". For the first time to use, please enter the default username
and password, then click the <Login> button. The login process now is completed.
In this login menu, you have to input the complete username and password respectively,
the switch will not give you a shortcut to username automatically. This looks inconvenient,
but safer.
In the switch, it supports a simple user management function allowing only one
administrator to configure the system at the same time. If there are two or more users using
administrator's identity, the switch will allow the only one who logins first to configure the
system. The rest of users, even with administrator's identity, can only monitor the system.
For those who have no administrator's identity, can only monitor the system. There are
only a maximum of three users able to login simultaneously in the switch.
To optimize the display effect, we recommend you use Microsoft IE 6.0 above, Netscape
V7.1 above or FireFox V1.00 above and have the resolution 1024x768. The switch
supported neutral web browser interface.
Note: When you login the switch WEB/CLI to manager, you must type the Username and
password first.
Note: The default IP of the switch 192.168.1.226.
Note: When you login P2261 switch Web UI management, you can use both IPv4 and IPv6
login for management.
VigorSwitch P2261 User's Guide
r
2
:
O
p
r
2
:
O
p
s
e
d
M
a
s
e
d
M
a
192.168.1.226
255.255.255.0
0.0.0.0
admin
admin
e
r
a
t
i
o
n
e
r
a
t
i
o
n
n
a
g
e
m
n
a
g
e
m
o
f
o
f
e
n
t
e
n
t
19
Hide quick links:
Advertisement
Table of Contents
