Lldp - Lldp-Med General Setup - Draytek VigorSwitch P2261 User Manual

Management Address
Auto refresh
Refresh
After finished the above settings, click Apply to save the configuration. The settings will
take effect.
2 . 3 . 3 0 L L D P –
2 . 3 . 3 0 L L D P –
Media Endpoint Discovery is an enhancement of LLDP, known as LLDP-MED, that
provides the following facilities:
Auto-discovery of LAN policies (such as VLAN, Layer 2 Priority and Differentiated
services (Diffserv) settings) enabling plug and play networking.
Device location discovery to allow creation of location databases and, in the case of Voice
over Internet Protocol (VoIP), Enhanced 911 services.
Extended and automated power management of Power over Ethernet (PoE) end points.
Inventory management, allowing network administrators to track their network devices,
and determine their characteristics (manufacturer, software and hardware versions, serial or
asset number).
Function name:
LLDP – LLDP-MED General Setup
Function description:
The function is used to configure the LLDP-MED. This function applies to VoIP devices
which support LLDP-MED.
98
2. Repeater
3. Bridge
4. WLAN Access Point
5. Router
6. Telephone
7. DOCSIS cable device
8. Station only
9. Reserved
When a capability is enabled, the capability is followed by
(+). If the capability is disabled, the capability is followed
by (-).
Management Address is the neighbour unit's address that is
used for higher layer entities to assist discovery by the
network management. This could for instance hold the
neighbour's IP address.
The simple counts will be refreshed automatically on the UI
screen.
The simple counts will be refreshed manually when user use
mouse to click on "Refresh" button.
L L D P - M E D G e n e
L L D P - M E D G e n e
r a l S e t u p
r a l S e t u p
VigorSwitch P2261 User's Guide