Draytek VigorSwitch P2261 User Manual page 205

TACACS+ Authentication Server Configuration
Enabled
IP Address/Hostname
Port
Secret
After finished the above settings, click Apply to save the configuration. The settings will
take effect.
VigorSwitch P2261 User's Guide
Enable the TACACS+ Authentication Server by checking
this box.
The IP address or hostname of the TACACS+
Authentication Server. IP address is expressed in dotted
decimal notation.
The TCP port to use on the TACACS+ Authentication
Server. If the port is set to 0 (zero), the default port (49) is
used on the TACACS+ Authentication Server.
The secret - up to 29 characters long - shared between the
TACACS+ Authentication Server and the switch stack.
197