Table of Contents
Advertisement
2
.
4
.
2
8
A
u
t
h
M
2
.
4
.
2
8
A
u
t
h
M
Function name:
Auth Method
Function description:
The function is used to configure a user with authenticated when he logs into the switch via
one of the management client interfaces.
Parameters description:
Client
Authentication Method
Fallback
After finished the above settings, click Apply to save the configuration. The settings will
take effect.
VigorSwitch P2261 User's Guide
e
t
h
o
d
e
t
h
o
d
The management client for which the configuration below
applies.
Authentication Method can be set to one of the following
values:
none: Authentication is disabled and login is not possible.
local: Use the local user database on the switch stack for
authentication.
RADIUS: Use a remote RADIUS server for authentication.
TACACS+: Use a remote TACACS+ server for
authentication.
Enable fallback to local authentication by checking this box.
If none of the configured authentication servers are alive,
the local user database is used for authentication.
This is only possible if the Authentication Method is set to a
value other than 'none' or 'local'.
211
Hide quick links:
Advertisement
Table of Contents
