Table of Contents
Advertisement
NTP Configuration
2
.
2
.
5
A
c
c
o
u
n
2
.
2
.
5
A
c
c
o
u
n
In this function, only administrator can create, modify or delete the username and password.
Administrator can modify other guest identities' password without confirming the
password but it is necessary to modify the administrator-equivalent identity.
Guest-equivalent identity can modify his password only. Please note that you must confirm
26
And when the time passes over the ending time, the system
time will be decreased one hour after one minute at the
time since it passed over.
The switch supports valid configurable day light saving
time is –5 ~ +5 step one hour. The zero for this parameter
means it need not have to adjust current time, equivalent to
in-act daylight saving. You don't have to set the
starting/ending date as well. If you set daylight saving to be
non-zero, you have to set the starting/ending date as well;
otherwise, the daylight saving function will not be
activated.
Default for Daylight Saving: 0.
The following parameters are configurable for the function
Daylight Saving and described in detail.
Day Light Saving Start:
This is used to set when to start performing the day light
saving time.
Month:
Day:
Hour:
Day Light Saving End:
This is used to set when to stop performing the daylight
saving time.
Month:
Day:
Hour:
NTP is Network Time Protocol and is used to sync the
network time based Greenwich Mean Time (GMT). If use
the NTP mode and select a built-in NTP time server or
manually specify an user-defined NTP server as well as
Time Zone, the switch will sync the time in a short after
pressing <Apply> button. Though it synchronizes the time
automatically, NTP does not update the time periodically
without user's processing.
Time Zone is an offset time off GMT. You have to select
the time zone first and then perform time sync via NTP
because the switch will combine this time zone offset and
updated NTP time to come out the local time, otherwise,
you will not able to get the correct time. The switch
supports configurable time zone from –12 to +13 step 1
hour.
Default Time zone: +8 Hrs.
t
-
U
s
e
r
s
t
-
U
s
e
r
s
Range is 1 ~ 12.
Default: 1
Range is 1 ~ 31.
Default: 1
Range is 0 ~ 23.
Default: 0
Range is 1 ~ 12.
Default: 1
Range is 1 ~ 31.
Default: 1
Range is 0 ~ 23.
Default: 0
VigorSwitch P2261 User's Guide
Hide quick links:
Advertisement
Table of Contents
