3. Click the tab of WAN Status.
It displays the information for all the WAN interfaces at the same time, including IP address,
MAC Address, Primary DNS, Secondary DNS, Gateway, RX Packets, TX Packets,
Connection Status and Up Time.
3
.
2
.
9
R
e
b
o
o
t
3
.
2
.
9
R
e
b
o
o
t
Reboot screen can appear after you finish the changing of the password, WAN and LAN settings.
You have to reboot the router to invoke the configured settings that you made before. Besides,
you can select Use default configuration to reboot the device and retrieve the default settings.
1. Go to System page and choose Reboot.
2. Check Use default configuration to retrieve the factory settings or uncheck this box
to invoke the newly configured settings.
3. Click Apply.
Vigor3300 Series Quick Start Guide
i
n
g
t
h
e
S
y
s
t
e
m
i
n
g
t
h
e
S
y
s
t
e
m
19