Table of Contents
Advertisement
Configure the switch-managed IP information on this page.
The Configured column is used to view or change the IP configuration.
The Current column is used to show the active IP configuration.
Parameter description:
DHCP Client
IP Address
IP Mask
IP Gateway
SNTP Server
DNS Server
VLAN ID
DNS Proxy
After finished the above settings, click Apply to save the configuration.
2
.
2
.
8
I
P
C
o
n
f
i
2
.
2
.
8
I
P
C
o
n
f
i
30
Enable the DHCP client by checking this box. If DHCP
fails and the configured IP address is zero, DHCP will
retry. If DHCP fails and the configured IP address is
non-zero, DHCP will stop and the configured IP settings
will be used. The DHCP client will announce the
configured System Name as hostname to provide DNS
lookup.
Provide the IP address of this switch in dotted decimal
notation.
Provide the IP mask of this switch dotted decimal notation.
Provide the IP address of the router in dotted decimal
notation.
Provide the IP address of the SNTP Server in dotted
decimal notation.
Provide the IP address of the DNS Server in dotted decimal
notation.
Provide the managed VLAN ID. The allowed range is 1 to
4095.
When DNS proxy is enabled, DUT will relay DNS requests
to the current configured DNS server on DUT, and reply as
a DNS resolver to the client device on the network.
g
u
r
a
t
i
o
n
–
I
P
v
6
g
u
r
a
t
i
o
n
–
I
P
v
6
VigorSwitch P2261 User's Guide
Hide quick links:
Advertisement
Table of Contents
