2
.
3
.
6
1
Q
o
S
–
2
.
3
.
6
1
Q
o
S
–
Function name:
QoS – DSCP
Function description:
The function i s used to set the QoS Port DSCP configuration for the basic QoS Port DSCP
Configuration settings for all switch ports.
Parameters description:
Port
Ingress
Egress
VigorSwitch P2261 User's Guide
D
S
C
P
D
S
C
P
The Port column shows the list of ports for which you can
configure DSCP ingress and egress settings.
In Ingress settings you can change ingress translation and
classification settings for individual ports.
There are two configuration parameters available in Ingress:
1. Translate - Enable the Ingress Translation click the
2. Classify - Classification for a port have 4 different
Port Egress Rewriting can be one of the following:
checkbox.
values.
Disable: No Ingress DSCP Classification.
DSCP=0: Classify if incoming (or translated if
enabled) DSCP is 0.
Selected: Classify only selected DSCP for which
classification is enabled as specified in DSCP
Translation window for the specific DSCP.
All: Classify all DSCP.
147