Table of Contents
Advertisement
C
h
a
p
t
e
C
h
a
p
t
e
In this user's manual, it will not only tell you how to install and connect your network
system but configure and monitor the 24+2 Gigabit L2 plus Switch through the built-in CLI
and web by RS-232 serial interface and Ethernet ports step-by-step. Many explanations in
detail of hardware and software functions are shown as well as the examples of the
operation for web-based interface and command-line interface (CLI).
1
.
1
O
v
e
r
v
i
e
w
1
.
1
O
v
e
r
v
i
e
w
The 24+2-port Gigabit L2 Managed Switch, is a standard switch that meets all IEEE
802.3/u/x/z Gigabit, Fast Ethernet specifications. The switch included 24-Port
10/100/1000Mbps TP (20-Port for TP; 4-Port for Combo) and 2-Port Dual-SFP Fiber
management Ethernet switch.
The switch can be managed through RS-232 serial port via directly connection, or through
Ethernet port using CLI or Web-based management unit, associated with SNMP agent.
With the SNMP agent, the network administrator can logon the switch to monitor,
configure and control each port's activity in a friendly way. The overall network
management is enhanced and the network efficiency is also improved to accommodate high
bandwidth applications. In addition, the switch features comprehensive and useful function
such as ACL, IP-MAC Binding, DHCP Option 82, QoS (Quality of Service), Spanning
Tree, VLAN, Port Trunking, Bandwidth Control, Port Security, SNMP/RMON, IGMP
Snooping capability via the intelligent software. It is suitable for both metro-LAN and
office application.
In this switch, Port 21 and Port 24 include two types of media --- TP and SFP Fiber (LC,
BiDi LC...); this port supports 10/100/1000Mbps TP or 1000Mbps SFP Fiber with
auto-detected function. 1000Mbps SFP Fiber transceiver is used for high-speed connection
expansion.
1000Mbps LC, Multi-Mode, SFP Fiber transceiver
1000Mbps LC, 10km, SFP Fiber transceiver
1000Mbps LC, 30km, SFP Fiber transceiver
1000Mbps LC, 50km, SFP Fiber transceiver
1000Mbps BiDi LC, 20km, 1550nm SFP Fiber WDM transceiver
1000Mbps BiDi LC, 20km, 1310nm SFP Fiber WDM transceiver
10/100/1000Mbps TP is a standard Ethernet port that meets all IEEE 802.3/u/x/z Gigabit,
Fast Ethernet specifications. 1000Mbps SFP Fiber transceiver is a Gigabit Ethernet port
that fully complies with all IEEE 802.3z and 1000Base-SX/LX standards.
1000Mbps Single Fiber WDM (BiDi) transceiver is designed with an optic Wavelength
Division Multiplexing (WDM) technology that transports bi-directional full duplex signal
over a single fiber simultaneously.
For upgrading firmware, please refer to the Section 2.5.2 for more details. The switch will
not stop operating while upgrading firmware and after that, the configuration keeps
unchanged.
VigorSwitch P2261 User's Guide
r
1
:
I
n
t
r
1
:
I
n
t
r
o
d
u
c
t
r
o
d
u
c
t
i
o
n
i
o
n
1
Hide quick links:
Advertisement
Table of Contents
