Snmp - Users - Draytek VigorSwitch P2261 User Manual

After finished the above settings, click Apply to save the configuration. The settings will
take effect.
2 . 2 . 2 1 S N M P
2 . 2 . 2 1 S N M P
Function name:
Users
Function description:
This function is used to configure SNMPv3 user. The Entry index key is User Name. To
create a new User Name account, please click the Add new user button, and enter the user
information then check Apply.
Max Group Number: 10.
Parameter Description:
Delete
User Name
46
Community – Indicates the community access string to
permit access to SNMPv3 agent. The allowed string length
is 1 to 32, and the allowed content is ASCII characters from
33 to 126. The community string will be treated as security
name and map a SNMPv1 or SNMPv2c community string.
User Name – The length of "User Name" string is restricted
to 1-32, and the allowed content is ASCII characters from
33 to 126.
Source IP – Indicates the SNMP access source address. A
particular range of source addresses can be used to restrict
source subnet when combined with source mask.
Source Mask - Indicates the SNMP access source address
mask.
– U s e r s
– U s e r s
Click it to delete the selected user setting.
A string identifying the user name that this entry should
belong to. The allowed string length is 1 to 32, and the
allowed content is ASCII characters from 33 to 126.
VigorSwitch P2261 User's Guide