Related Manuals for Draytek VigorSwitch 2540 Series
Summary of Contents for Draytek VigorSwitch 2540 Series
- Page 2 VigorSwitch 2540x Series (P2540x/ G2540x) L2+ Managed Switch Quick Start Guide Version: 1.0 Firmware Version: V2.6.3 (For future update, please visit DrayTek web site) Date: July 1, 2020...
- Page 3 Intellectual Property Rights (IPR) Information © All rights reserved. This publication contains information that is protected Copyrights by copyright. No part may be reproduced, transmitted, transcribed, stored in a retrieval system, or translated into any language without written permission from the copyright holders. The following trademarks are used in this document: Trademarks ...
-
Page 4: Eu Declaration Of Conformity
EU Declaration of Conformity We DrayTek Corp. , office at No.26, Fu Shing Road, HuKou County, Hsin-Chu Industry Park, Hsinchu 300, Taiwan , R.O.C., declare under our sole responsibility that the product Product name: PoE 48+6 ports 10G up-link Switch ... - Page 5 EU Declaration of Conformity We DrayTek Corp. , office at No.26, Fu Shing Road, HuKou County, Hsin-Chu Industry Park, Hsinchu 300, Taiwan , R.O.C., declare under our sole responsibility that the product Product name: 48+6 ports 10G up-link Switch ...
-
Page 6: Regulatory Information
(2) This device may accept any interference received, including interference that may cause undesired operation. Caution: Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. More update, please visit www.draytek.com. - Page 7 Web registration is preferred. You can register your Vigor switch via http://www.draytek.com. Firmware & Tools Updates Due to the continuous evolution of DrayTek technology, all switches will be regularly upgraded. Please consult the DrayTek web site for more information on newest firmware, tools and...
- Page 8 The L2+ Managed Switch (48 Gigabit Ports + 6 SFP+ Ports) is a standard switch that meets both IEEE 802.3u/ab Fast Ethernet and Gigabit Ethernet specifications. The network administrator can logon the switch to monitor, configure and control each port’s activity. In addition, the switch implements the QoS (Quality of Service) and VLAN.
- Page 9 The type of the power cord depends on the country that the switch will be installed. UK-type Power Cord EU-type Power Cord USA/Taiwan-type Power Cord AU/NZ-type Power Cord If any of these items is found missing or damaged, please contact your local supplier for replacement.
- Page 10 Status Explanation An alert for system failure due to overheating On (Red) or wrong voltage. Monitor The device is in normal condition and running normally. The power is over (>) 80% watts PoE power Blinking (Green) budget. Alert (for P2540x) The power is under (<) 80% watts PoE power budget.
- Page 11 Interface Description Restore the default settings. Port 1 to Port 48 can be used for Ethernet Port 1 ~ 48 (PoE) connection and PoE connection, depending on Port 1 ~ 48 (RJ45) the device connected Port 49 ~ 54 (SFP) Port 49 to Port 54 are used for 10G fiber connection.
- Page 12 This section will guide you to install the switch through hardware connection and configure the switch’s settings through web browser. Before starting to configure the switch, you have to connect your devices correctly. Note Power the device to this switch and get 54V power source through Cat.
- Page 13 The switch can be installed easily by using rack mount kit. Attach the brackets to the chassis of a 19-inch rack. The second bracket attaches the other side of the chassis as above procedure. After the bracket installation, the VigorSwitch’s chassis can be installed in a rack by using four screws for each side of the rack.
- Page 14 In this section, take VigorSwitch G2540x as an example: Before using the switch, perform the following steps: 1. Set up a physical path between the configured the switch and a PC by a qualified UTP Cat. 5e cable with RJ-45 connector. If a PC directly connects to the switch, you have to setup the same subnet mask for PC and the switch.
- Page 15 This DrayTek product uses software partially or completely licensed under the terms of the GNU GENERAL PUBLIC LICENSE. The author of the software does not provide any warranty. A Limited Warranty is offered on DrayTek products. This Limited Warranty does not cover any software applications or programs.