Type
MAC address
VLAN
Port Members
Auto refresh
Refresh
Clear
2
.
3
.
4
1
V
L
A
N
2
.
3
.
4
1
V
L
A
N
To assign a specific VLAN for management purpose, the management VLAN is used to
establish an IP connection to the switch from a workstation connected to a port in the
VLAN. This connection supports a VSM, SNMP, and Telnet session. By default, the active
management VLAN is VLAN 1, but you can designate any VLAN as the management
VLAN using the Management VLAN window. Only one management VLAN can be active
at a time.
When you specify a new management VLAN, your HTTP connection to the old
management VLAN is lost. For this reason, you should have a connection between your
management station and a port in the new management VLAN or connect to the new
management VLAN through a multi-VLAN route.
Function name:
VLAN – VLAN Membership
Function description:
The function is used for adding and deleting VLANs as well as adding and deleting port
members of each VLAN.
Parameters description:
VigorSwitch P2261 User's Guide
Indicates whether the entry is a static or a dynamic entry.
The MAC address of the entry.
The VLAN ID of the entry.
The ports that are members of the entry.
The simple counts will be refreshed automatically on the UI
screen.
The simple counts will be refreshed manually when user use
mouse to click on "Refresh" button.
The simple counts will be reset to zero when user use mouse
to click on "Clear" button.
–
V
L
A
N
M
e
m
b
e
r
–
V
L
A
N
M
e
m
b
e
r
s
h
i
p
s
h
i
p
119