Ntp & Time Configuration - Draytek VigorSwitch P2261 User Manual

2 . 2 . 4 N T P & T
2 . 2 . 4 N T P & T
Function name:
NTP & Time Configuration
Function description:
This page configures the switch Time. Time configure is including Time Configuration and
NTP Configuration.
The switch provides manual and automatic ways to set the system time via NTP. Manual
setting is simple and you just input "Year", "Month", "Day", "Hour", "Minute" and
"Second" within the valid value range indicated in each item.
Parameter description:
Clock Source
Local Time
Time Zone Offset
/ Time Set Offset
Daylight Saving
VigorSwitch P2261 User's Guide
i m e C o n f i g u r a t i o
i m e C o n f i g u r a t i o
There are two modes for configuring where the Clock
Source is from. You can choose one of them to make time
setting.
1. Use Local Settings: In this mode Clock Source is from
2. Use NTP Server: In this mode Clock Source is from
Show the current time of the system.
Provide the time zone offset relative to UTC/GMT. The
offset is given in minutes east of GMT. The valid range is
from -720 to 720 minutes.
Daylight saving is adopted in some countries. If set, it will
adjust the time lag or in advance in unit of hours, according
to the starting date and the ending date. For example, if you
set the day light saving to be 1 hour. When the time passes
over the starting time, the system time will be increased
one hour after one minute at the time since it passed over.
n
n
Local Time. Set the time manually.
NTP Server. The switch can link to Network Time
Protocol server to obtain the correct time automatically
when NTP server has been set.
25