Table of Contents
Advertisement
Conflict
Auto refresh
Resolve Conflict
Refresh
After finished the above settings, click Apply to save the configuration. The settings will
take effect.
2
.
3
.
6
7
Q
o
S
–
2
.
3
.
6
7
Q
o
S
–
Function name:
QoS – Storm Control
Function description:
The function is used to configure the Storm control for the switch. There is a unicast storm
rate control, multicast storm rate control, and a broadcast storm rate control. These only
affect flooded frames, i.e. frames with a (VLAN ID, DMAC) pair not present on the MAC
Address table. The configuration indicates the permitted packet rate for unicast, multicast
or broadcast traffic across the switch
Parameters description:
Frame Type
156
DSCP: If a frame matches the QCE then DSCP will be
classified with the value displayed under DSCP column.
Displays QCE status. It may happen that resources required
to add a QCE may not available, in that case it shows
conflict status as 'Yes', otherwise it is always 'No'. Please
note that conflict can be resolved by releasing the resource
required by the QCE and pressing 'Refresh' button.
Click to undo any changes made locally and revert to
previously saved values.
Click to release the resources required to add QCL entry,
incase conflict status for any QCL entry is 'yes'.
You can click them to refresh the QCL information by
manual; any changes made locally will be undone.
S
t
o
r
m
C
o
n
t
r
o
l
S
t
o
r
m
C
o
n
t
r
o
l
The settings in a particular row apply to the frame type
listed here: Unicast, Multicast or Broadcast.
.
VigorSwitch P2261 User's Guide
Hide quick links:
Advertisement
Table of Contents
