of operation, state machines and variables for the registration and de-registration of
attribute values.
A GARP participation in a switch or an end station consists of a GARP application
component, and a GARP Information Declaration (GID) component associated with each
port or the switch. The propagation of information between GARP participants for the
same application in a bridge is carried out by the GARP Information Propagation (GIP)
component. Protocol exchanges take place between GARP participants by means of LLC
Type 1 services, using the group MAC address and PDU format defined for the GARP
application concerned.
Function name:
GARP – General Setup
Function description:
The function is used to configure the basic GARP Configuration settings for all switch
ports.
Parameters description:
Port
Timer Values
Application
Attribute Type
GARP Applicant
138
The Port column shows the list of ports for which you can
configure GARP settings.
Three different timers can be configured on this page:
1. Join Timer - The default value for Join timer is 200ms.
2. Leave Timer - The range of values for Leave Time is
600-1000ms. The default value for Leave Timer is 600ms.
3. Leave All Timer - The default value for Leave All Timer
is 10000ms
Currently only supported application is GVRP.
Currently only supported Attribute Type is VLAN.
This configuration is used to configure the Applicant state
machine behavior for GARP on a particular port locally.
Applicant state machine behavior for GARP on a particular
port locally.
normal-participate: In this mode the Applicant state
VigorSwitch P2261 User's Guide