Snmp - Trap - Draytek VigorSwitch P2261 User Manual

2 . 2 . 2 5 S N M P
2 . 2 . 2 5 S N M P
Function name:
Trap
Function description:
This function is used to configure SNMP trap. To create a new trap account, please click
the No number link, and enter the trap information then click Apply.
Max Group Number : 6.
Parameters description:
Delete
No
Version
Server IP
UDP Port
Community /Security
Name
Severity Level
Security Level
Authentication Protocol
Privacy Protocol
Click the number link to access into the configuration page for each trap host.
52
– T r a p
– T r a p
Click to delete the entry.
Number link for Trap Host configuration.
Display the version of the trap host.
Display the SNMP Host IP address.
Display the port number for UDP.
Display the name of community / security.
Display the level for severity.
Display the level for security.
Display the protocol configured for authentication.
Display the protocol configured for privacy.
VigorSwitch P2261 User's Guide