Table of Contents
Advertisement
2
.
3
.
6
6
Q
o
S
–
2
.
3
.
6
6
Q
o
S
–
Function name:
QoS – QoS Status
Function description:
The function is used to configure and shows the QCL status by different QCL (QoS
Control List) users. Each row describes the QCE that is defined. It is a conflict if a specific
QCE (QoS Control Entry) is not applied to the hardware due to hardware limitations. The
maximum number of QCEs is 256 on each switch.
Parameters description:
User
QCE#
Port
Action
VigorSwitch P2261 User's Guide
Q
o
S
S
t
a
t
u
s
Q
o
S
S
t
a
t
u
s
Select the QCL status from this drop down list.
Indicates the QCL user.
Indicates the type of frame to look for incoming frames.
Possible frame types are:
Any: The QCE will match all frame type.
Ethernet: Only Ethernet frames (with Ether Type
0x600-0xFFFF) are allowed.
LLC: Only (LLC) frames are allowed.
LLC: Only (SNAP) frames are allowed.
IPv4: The QCE will match only IPV4 frames.
IPv6: The QCE will match only IPV6 frames.
Indicates the list of ports configured with the QCE.
Indicates the classification action taken on ingress frame if
parameters configured are matched with the frame's content.
There are three action fields: Class, DPL and DSCP.
Class: Classified QoS Class; if a frame matches the QCE it
will be put in the queue.
DPL: Drop Precedence Level; if a frame matches the QCE
then DP level will set to value displayed under DPL
column.
155
Hide quick links:
Advertisement
Table of Contents
