Table of Contents
Advertisement
Parameter description:
Traffic Rate Unit
Ingress Rate
Egress Rate
3
.
6
.
3
S
t
o
r
m
C
o
n
t
3
.
6
.
3
S
t
o
r
m
C
o
n
t
Function name:
Storm Control Configuration
Function description:
Storm Control is used to block unnecessary multicast and broadcast frames that reduce
switch's performance. When the function is enabled and Storm Control rate settings are
detected as exceeded, the unnecessary frames would be dropped
Set the unit of traffic rate for Ingress/Egress.
Set up the limit of Ingress bandwidth for the port you
choose. Incoming traffic will be discarded if the rate
exceeds the value you set up in Data Rate field. Pause
frames are also generated if flow control is enabled. The
format of the packet limits to unicast, broadcast and
multicast. Valid value of Port 1~24 ranges from
128~3968 kbps.
Choose the Ingress Rate number from the drop down list.
The corresponding rate will be shown on the right side.
Default: No Limit
Set up the limit of Egress bandwidth for the port you
choose. Outgoing traffic will be discarded if the rate
exceeds the value you set up in Data Rate field. Pause
frames are also generated if flow control is enabled.
The format of the packet limits to unicast, broadcast and
multicast. Valid value of Port 1~24 ranges from
128~3968 kbps.
Choose the Egress Rate number from the drop down list.
The corresponding rate will be shown on the right side.
Default: No Limit
r
o
l
r
o
l
56
VigorSwitch G1240 User's Guide
Advertisement
Table of Contents
