Chapter 2
Cisco IOS Commands for the Catalyst 4500 Series Switches
show diagnostic result module
To display the module-based diagnostic test results, use the show diagnostic result module command.
Syntax Description
slot-num
all
test
test-id
test-id-range
all
detail
Defaults
A summary of the test results for all modules in the chassis is displayed.
Command Modes
Privileged EXEC mode
Command History
Release
12.2(18)EW
Examples
This example shows how to display the summary results for all modules in the chassis:
Switch# show diagnostic result module
Current bootup diagnostic level: minimal
module 1:
Overall diagnostic result: PASS
Diagnostic level at card bootup: bypass
Test results: (. = Pass, F = Fail, U = Untested)
module 4:
Overall diagnostic result: PASS
Diagnostic level at card bootup: minimal
Test results: (. = Pass, F = Fail, U = Untested)
OL-27596 -01
show diagnostic result module [slot-num | all] [test [test-id | test-id-range | all]] [detail]
(Optional) Specifies the slot on which diagnostics are displayed.
(Optional) Displays the diagnostics for all slots.
(Optional) Displays selected tests on the specified module.
(Optional) Specifies a single test ID.
(Optional) Specifies a range of test IDs.
(Optional) Displays the diagnostics for all tests.
(Optional) Displays the complete test results.
Modification
Support for this command was introduced on the Catalyst 4500 series switch.
1) supervisor-bootup -----------------------> U
2) packet-memory-bootup --------------------> U
3) packet-memory-ongoing -------------------> U
1) linecard-online-diag --------------------> .
Catalyst 4500 Series Switch Cisco IOS Command Reference—Release IOS XE 3.4.0SG and IOS 15.1(2)SG)
show diagnostic result module
2-669