Cisco Catalyst 4500 Series Command Reference Manual page 705

Chapter 2 Cisco IOS Commands for the Catalyst 4500 Series Switches
Related Commands Command
authentication
control-direction
authentication critical
recovery delay
authentication event
authentication fallback
authentication host-mode
authentication open
authentication order
authentication periodic
authentication
port-control
authentication priority
authentication timer
authentication violation
OL-27596 -01
Description
Changes the port control to unidirectional or bidirectional.
Configures the 802.1X critical authentication parameters.
Configures the actions for authentication events.
Enables the Webauth fallback and specifies the fallback profile to
use when failing over to Webauth.
Defines the classification of a session that will be used to apply
the access-policies using the host-mode configuration.
Enables open access on this port.
Specifies the order in which authentication methods should be
attempted for a client on an interface.
Enables reauthentication for this port.
Configures the port-control value.
Specifies the priority of authentication methods on an interface.
Configures the authentication timer.
Specifies the action to be taken when a security violation exists
on a port.
Catalyst 4500 Series Switch Cisco IOS Command Reference—Release IOS XE 3.4.0SG and IOS 15.1(2)SG)
show authentication
2-647