Pppoe Intermediate-Agent Vendor-Tag Strip - Cisco Catalyst 4500 Series Command Reference Manual

pppoe intermediate-agent vendor-tag strip

pppoe intermediate-agent vendor-tag strip
This command takes effect only if you enable the pppoe intermediate-agent interface configuration
Note
command and the pppoe intermediate-agent trust command.
To enable vendor-tag stripping on PPPoE Discovery packets from PPPoE Server (or BRAS), use the
pppoe intermediate-agent vendor-tag strip command. To disable this setting, use the no form of this
command.
Syntax Description This command has no arguments or keywords.
Defaults
vendor-tag stripping is turned off.
Command Modes
Interface configuration mode
Command History Release
12.2(50)SG
Usage Guidelines
This command has no effect on untrusted interfaces.
Use this command on a PPPoE Intermediate Agent trusted interface to strip off the vendor-specific tags
in PPPoE Discovery packets that arrive downstream from the PPPoE Server (or BRAS), if any.
Examples
This example shows how to set vendor-tag stripping on an interface:
Switch(config-if)# pppoe intermediate-agent vendor-tag strip
This example shows how to disable vendor-tag stripping on an interface:
Switch(config-if)# no pppoe intermediate-agent vendor-tag strip
Related Commands Command
pppoe intermediate-agent
(interface)
pppoe intermediate-agent
trust
Catalyst 4500 Series Switch Cisco IOS Command Reference—Release IOS XE 3.4.0SG and IOS 15.1(2)SG)
2-562
pppoe intermediate-agent vendor-tag strip
no pppoe intermediate-agent vendor-tag strip
Modification
Support for this command was introduced on the Catalyst 4500 series
switch.
Chapter 2 Cisco IOS Commands for the Catalyst 4500 Series Switches
Description
Enables the PPPoE Intermediate Agent feature on an interface.
Sets the trust configuration of an interface.
OL-27596 -01