Cisco Catalyst 4500 Series Command Reference Manual page 673

Chapter 2 Cisco IOS Commands for the Catalyst 4500 Series Switches
Related Commands Command
bandwidth
class
dbl
policy-map
priority
random-detect (refer to Cisco
IOS documentation)
shape (class-based queueing)
show policy-map
OL-27596 -01
Description
Creates a signaling class structure that can be referred to by its
name.
Specifies the name of the class whose traffic policy you want to
create or change.
Enables active queue management on a transmit queue used by a
class of traffic.
Creates a policy map that can be attached to multiple ports to
specify a service policy and to enter policy-map configuration
mode.
Enables the strict priority queue (low-latency queueing [LLQ])
and to give priority to a class of traffic belonging to a policy map
attached to a physical port.
Enables Weighted Random Early Detection (WRED) or
distributed WRED (DWRED).
Enables traffic shaping a class of traffic in a policy map attached
to a physical port.
Displays information about the policy map.
Catalyst 4500 Series Switch Cisco IOS Command Reference—Release IOS XE 3.4.0SG and IOS 15.1(2)SG)
service-policy (policy-map class)
2-615