Dot1X Credentials (Global Configuration) - Cisco Catalyst 4500 Series Command Reference Manual

Chapter 2 Cisco IOS Commands for the Catalyst 4500 Series Switches

dot1x credentials (global configuration)

Use the dot1x credentials global configuration command to configure a profile on a supplicant switch.
Syntax Description
profile
Defaults No profile is configured for the switch.
Command Modes Global configuration
Command History Release
12.2(54)SG
Usage Guidelines You must have another switch set up as the authenticator for this switch to be the supplicant.
Examples
This example shows how to configure a switch as a supplicant:
Switch(config)# dot1x credentials profile
You can verify your settings by entering the show running-config privileged EXEC command.
Related Commands Command
cisp enable
show cisp
OL-27596 -01
dot1x credentials profile
no dot1x credentials profile
Specify a profile for the supplicant switch.
Modification
This command was introduced.
Description
Enables Client Information Signalling Protocol (CISP).
Displays CISP information for a specified interface.
Catalyst 4500 Series Switch Cisco IOS Command Reference—Release IOS XE 3.4.0SG and IOS 15.1(2)SG)
dot1x credentials (global configuration)
2-211