Cisco Catalyst 4500 Series Command Reference Manual page 929

Chapter 2 Cisco IOS Commands for the Catalyst 4500 Series Switches
This is an example of output from the show nmsp status command:
Switch# show nmsp status
NMSP Status
---------------
NMSP: enabled
MSE IP Address
--------------
172.19.35.109
Switch#
This is an example of output from the show nmsp show subscription detail and show nmsp show
subscription summary commands:
Switch# show nmsp subscription detail
Mobility Services Subscribed by 172.19.35.109:
Services
------------
Attachment:
Location:
Switch# show nmsp subscription summary
Mobility Services Subscribed:
MSE IP Address
--------------
172.19.35.109
Switch#
Related Commands Command
clear nmsp statistics
nmsp
OL-27596 -01
TxEchoResp RxEchoReq TxData RxData
---------- --------- ------ ------
5 5
Subservices
-------------------
Wired Station
Subscription
Services
--------
Attachment, Location
Catalyst 4500 Series Switch Cisco IOS Command Reference—Release IOS XE 3.4.0SG and IOS 15.1(2)SG)
4 4
Description
Clears the NMSP statistic counters.
Configures Network Mobility Services Protocol (NMSP) on the
switch.
show nmsp
2-871