Cisco Catalyst 4500 Series Command Reference Manual page 422

Cisco ios command reference release ios xe 3.4.0sg and ios 15.1(2)sg
Hide thumbs Also See for Catalyst 4500 Series:
Table of Contents

Advertisement

ip wccp redirect
Examples
The following example shows how to configure a session in which reverse proxy packets on Ethernet
interface 3/1 are being checked for redirection and redirected to a Cisco Cache Engine:
Switch(config)# ip wccp 99
Switch(config)# interface gigabitethernet 3/1
Switch(config-if)# ip wccp 99 redirect out
The following example shows how to configure a session in which HTTP traffic arriving on
GigabitEthernet interface 3/1 is redirected to a Cache Engine:
Switch(config)# ip wccp web-cache
Switch(config)# interface gigabitethernet 3/1
Switch(config-if)# ip wccp web-cache redirect in
Related Commands
Command
ip wccp check services all
ip wccp group-listen
ip wccp redirect exclude in
show ip interface
show ip wccp
Catalyst 4500 Series Switch Cisco IOS Command Reference—Release IOS XE 3.4.0SG and IOS 15.1(2)SG)
2-364
Chapter 2
Cisco IOS Commands for the Catalyst 4500 Series Switches
Description
Configures an interface on a router to enable or disable the
reception of IP multicast packets for Web Cache
Communication Protocol (WCCP).
Configures an interface on a router to enable or disable the
reception of IP multicast packets for Web Cache
Communication Protocol (WCCP).
Enables redirection exclusion on an interface.
Displays the usability status of interfaces that are configured
for IP.
Displays the WCCP global configuration and statistics.
OL-27596 -01

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents