Profile Flow - Cisco Catalyst 4500 Series Command Reference Manual

Chapter 2 Cisco IOS Commands for the Catalyst 4500 Series Switches

profile flow

To enable Media Services Proxy (MSP), use the the profile flow command. To return to the default
setting, use the no form of this command
Syntax Description
This command has no arguments or keywords.
Defaults This command has no default settings.
Command Modes config
Command History Release
Release IOS XE
3.4.0SG and IOS
15.1(2)SG)
Usage Guidelines
You must configure the MSP profile flow command to activate the MSP platform Packet parser. This is
because the the MSP device handler is tightly coupled with MSP flow parser. Not enabling this CLI
means that MSP will not send SIP, H323 notifications to IOS sensor.
Examples This example shows how to enable MSP:
Switch(config)# profile flow
OL-27596 -01
profile flow
no profile flow
Modification
Support was introduced on the Catalyst 4500 series switches.
Catalyst 4500 Series Switch Cisco IOS Command Reference—Release IOS XE 3.4.0SG and IOS 15.1(2)SG)
profile flow
2-575