Cisco Catalyst 4500 Series Command Reference Manual page 993

Cisco ios command reference release ios xe 3.4.0sg and ios 15.1(2)sg
Hide thumbs Also See for Catalyst 4500 Series:
Table of Contents

Advertisement

Chapter 2
Cisco IOS Commands for the Catalyst 4500 Series Switches
This is an example of output from the show storm-control multicast command on a Supervisor
Engine 6-E:
Switch# show storm-control multicast //Supervisor Engine 6-E
Interface Filter State
--------- ------------- --------- --------- -----
Fa6/2
Switch#
This is an example of output from the show storm-control command on a Supervisor Engine 6-E when
no keywords are entered:
Switch# show storm-control
Interface Filter State
--------- ------------- --------- --------- -----
Fa6/1
Fa6/2
Switch#
This is an example of output from the show storm-control command for a specified interface:
Switch# show storm-control fastethernet2/17
Interface
---------
Fa2/17
Switch#
This is an example of output from the show storm-control command for a specified interface on a
Supervisor Engine 6-E:
Switch# show storm-control interface fastethernet6/1
Interface
---------
Fa6/1
Switch#
Table 2-40
Table 2-40
Field
Interface
Filter State
Level
Current
OL-27596 -01
Broadcast Multicast Level
Blocking
Enabled
Broadcast Multicast Level
Blocking
Enabled
Blocking
Enabled
Filter State
Level
-------------
-------
Forwarding
50.00%
Filter State
Broadcast Multicast
-------------
-------
Blocking
Enabled
describes the fields in the show storm-control display.
show storm-control Field Descriptions
Description
Displays the ID of the interface.
Displays the status of the filter:
Blocking—Storm control is enabled, and a storm has occurred.
Forwarding—Storm control is enabled, and no storms have occurred.
Inactive—Storm control is disabled.
Displays the threshold level set on the interface for broadcast traffic.
Displays the bandwidth utilization of broadcast traffic as a percentage of
total available bandwidth. This field is valid only when storm control is
enabled.
N/A is displayed for interfaces that do storm control in the hardware.
Note
Catalyst 4500 Series Switch Cisco IOS Command Reference—Release IOS XE 3.4.0SG and IOS 15.1(2)SG)
Enabled
61%
Disabled
81%
Enabled
61%
Current
-------
0.00%
Level
-------
-----
Disabled
81%
show storm-control
2-935

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents