Cisco Catalyst 4500 Series Command Reference Manual page 609

Chapter 2 Cisco IOS Commands for the Catalyst 4500 Series Switches
Table 2-18
Power Supply
One side at 220VAC + 220VAC +
220VAC, the other at 220VAC +
220VAC
One side at 220VAC + 220VAC +
220VAC, the other at 220VAC
One side at 220VAC + 220VAC, the
other at 220VAC
1. Power supply output drawings should not exceed the total power.
Examples This example shows how to set the power management mode to combined:
Switch(config)# power redundancy-mode combined
Switch(config)#
Related Commands Command
show power
OL-27596 -01
Power Output in Combined Mode for the 9000 W AC Power Supply
Description
Displays information about the power status.
Catalyst 4500 Series Switch Cisco IOS Command Reference—Release IOS XE 3.4.0SG and IOS 15.1(2)SG)
12V (data) (W) -50V (PoE) (W)
2939 11250
2168 8300
2168 6225
power redundancy-mode
1
Total Power
(W)
13440
9890
7410
2-551