qos account layer2 encapsulation
This example shows how to disable the consistent accounting of the Layer 2 encapsulation by the QoS
features:
Switch# config terminal
Switch(config)# no qos account layer2 encapsulation
Switch (config)# end
Switch #
Related Commands
Command
show interfaces
switchport
switchport block
Catalyst 4500 Series Switch Cisco IOS Command Reference—Release IOS XE 3.4.0SG and IOS 15.1(2)SG)
2-578
Chapter 2
Cisco IOS Commands for the Catalyst 4500 Series Switches
Description
Displays traffic on a specific interface.
Modifies the switching characteristics of a Layer 2 switch
interface.
Prevents the unknown multicast or unicast packets from being
forwarded.
OL-27596 -01