Cisco Catalyst 4500 Series Command Reference Manual page 465

Chapter 2 Cisco IOS Commands for the Catalyst 4500 Series Switches
This example shows how to enable the global event trunk-status setting on interface gi11/1:
Switch# config terminal
Enter configuration commands, one per line.
Switch(config)# interface gi11/1
Switch(config-if)# logging event trunk-status use-global
Switch(config-if)# end
Switch#
Related Commands Command
logging event trunk-status global
(global configuration)
OL-27596 -01
Catalyst 4500 Series Switch Cisco IOS Command Reference—Release IOS XE 3.4.0SG and IOS 15.1(2)SG)
logging event trunk-status (interface configuration)
End with CNTL/Z.
Description
Enables the trunk-status event messaging on an interface.
2-407