Debug Ip Dhcp Snooping Event - Cisco Catalyst 4500 Series Command Reference Manual

debug ip dhcp snooping event

debug ip dhcp snooping event
To debug the DHCP snooping events, use the debug ip dhcp snooping event command. To disable
debugging output, use the no form of this command.
Syntax Description
This command has no arguments or keywords.
Defaults Debugging of snooping event is disabled.
Command Modes Privileged EXEC mode
Command History Release
12.1(12c)EW
Examples This example shows how to enable the debugging for the DHCP snooping events:
Switch# debug ip dhcp snooping event
Switch#
This example shows how to disable the debugging for the DHCP snooping events:
Switch# no debug ip dhcp snooping event
Switch#
Related Commands Command
debug ip dhcp snooping
packet
Catalyst 4500 Series Switch Cisco IOS Command Reference—Release IOS XE 3.4.0SG and IOS 15.1(2)SG)
2-154
debug ip dhcp snooping event
no debug ip dhcp snooping event
Modification
Support for this command was introduced on the Catalyst 4500 series switch.
Chapter 2 Cisco IOS Commands for the Catalyst 4500 Series Switches
Description
Debugs the DHCP snooping messages.
OL-27596 -01