Setting The Integration Mode On Dpa 7630; Entering Dialing Sequences For Mwi Activation On Dpa 7630 - Cisco DPA 7630 Administration Manual

Configuring Octel/Definity Integration Settings

Setting the Integration Mode on DPA 7630

Step 1
Step 2
Step 3
Step 4
Step 5

Entering Dialing Sequences for MWI Activation on DPA 7630

Step 1
Step 2
Cisco DPA 7630/7610 Voice Mail Gateways Administration Guide
6-2
You must choose the mode of integration by which you are implementing the
DPA 7630:
• Simple—Cisco CallManager and Octel integration
Hybrid—Cisco CallManager, Octel, and Definity integration
•
Selecting the integration mode automatically forces the 24 ports on DPA 7630 to
support particular settings. To understand these settings, review
"Choosing an Integration Mode"
To set the integration mode, perform these steps:
From the main menu, choose Configure.
Choose Octel/Definity integration.
Choose Mode.
Choose the appropriate configuration type:
Simple—Cisco CallManager and Octel integration
•
• Hybrid—Cisco CallManager, Octel, and Definity integration
Restart the DPA 7630.
On Definity and Octel systems, you must set the dialing sequence used to enable
and disable the MWI on phones connected to the Definity system. Verify and
obtain the dialing sequences set on the Octel and Definity systems (see the
"Setting Dialing Sequence for Message Waiting Indicator" section on page 4-15
for details).
To enter the dialing sequences, perform these steps:
From the main menu, choose Configure.
Choose Octel/Definity integration.
Chapter 6 Configuring Telephony Settings
before selecting an integration method.
Chapter 2,
78-11069-03