Viewing And Changing Ip Address Settings; Configuring The Administrator Interface Web Server Port - Cisco 3521 Administrator's Manual

Viewing and Changing IP Address Settings

Viewing and Changing IP Address Settings

In the Gateway interface, you can view or change the gateway's IP address, Ethernet speed, Domain
Name Server (DNS) settings, and duplex settings.
Procedure
In the Gateway interface, on the sidebar, click Board.
Step 1
Click the Addressing tab.
Step 2
Table 2-3
Table 2-3
Field
IP Address
Router IP field
Subnet Mask
DNS Server IP
Device DNS Name field
Port type
MAC Address
Port settings
Port status
If you change any of these settings, when you finish, on the toolbar, click Upload.
Step 3

Configuring the Administrator Interface Web Server Port

Port 80 is the default Administrator interface web server port. For additional security, you can configure
the web server port as a different port number.
Procedure
In the Gateway interface, on the sidebar, click Board.
Step 1
Click the Web tab.
Step 2
Administrator's Guide for Cisco IPVC 3521 BRI Gateway, Cisco IPVC 3526 PRI Gateway, and Cisco IPVC 3540 PRI Gateway
2-18
explains the fields you can view or change in the Addressing tab.
Addressing Tab Fields
Chapter 2 Installing the Cisco IPVC 3500 Series Gateway
Description
The IP address you want to assign to the gateway.
The router IP address you want the gateway to
use.
The subnet mask you want the gateway to use.
The IP address of the Domain Name Server
(DNS) that the gateway accesses.
The device name of the DNS server that the
gateway accesses (read-only).
The Ethernet port type that the gateway uses
(read-only).
The MAC address of the gateway (read-only).
The Ethernet speed and duplex settings that you
want the gateway to use.
The status of the Ethernet port, which depends on
the settings made in the Port settings field.
OL-7995-01