Additional Configurations; Configuring Access Lists; Configuring Bulk Statistics - Cisco ASR 5000 Administration Manual

▀ R-eWAG Configuration
firewall nat-alg sip
firewall nat-alg h323
end
Notes:
 For more information on ECS ruledef and rulebase configurations, refer to the Enhanced Charging Service
Administration Guide.

Additional Configurations

This section covers the following configurations:


Configuring Access Lists



Configuring Bulk Statistics


Configuring Congestion Control

Configuring Offline Charging for R-eWAG

Configuring Session Recovery
Configuring Access Lists
To create and configure an ACL to use in steering subscriber traffic through ECS, use the following configuration:
configure
context <context_name>
ip access-list <access_list_name>
redirect css service <ecs_service_name> <keywords> <options>
end
Notes:

<ecs_service_name>
configured.
Configuring Bulk Statistics
To configure bulk statics collection for R-eWAG service, use the following configuration:
configure
bulkstats mode
ipsg schema <schema_name> format <schema_format>
end
▄ Cisco ASR 5000 Enhanced Wireless Access Gateway Administration Guide
58
must be the name of the enhanced charging service; no CSS service has to be
RADIUS-based Enhanced Wireless Access Gateway Configuration