Adjust The Optic Block - Honeywell VC4 User Manual

3. Tap ADVANCED DIAGNOSTIC to view LED drive and Optic value levels for 4 points and
check whether the LED drive levels are within the recommended range.

4.21 Adjust the Optic Block

1. In the left navigation panel, tap OVERVIEW
2. Tap on the Optic button to enter to the optic detail page.
3. In the Optic Block page, tap ADJUST OPTICS, and then tap CONFIRM. Follow up on screen
instructions and when Next button appear, tap NEXT button to continue.
VC4™
.
63 User Manual