Esserbus ® Transponder Special Detector (Sd) (Part No. 808623.40) - Honeywell ESSER FACP Technical Information

12.3 esserbus
®
To connect special detectors and related reset functions with pre-alarm, fault and alarm assessment. The
transponder can be adapted to the different reset behaviours of the connected special detectors.
The inputs and outputs of the transponder can be connected with one another in such a way that switching on /
resetting a signalling input leads to short-term activation of the special detector's reset input. In order to support
various special detectors, the transponder's inputs can be programmed with a suppression time of up to
255 seconds when resetting.
Fig. 49: esserbus ® transponder for UniVario
The transponder can solely be operated with the abovementioned properties on the FlexES Control
FACP. On the IQ8Control and Compact FACP, the transponder behaves like an alarm transponder
(Part No. 808623).
Specifications
Loop
Rated voltage
Rated current
External power supply
Operating voltage
Current consumption
Quiescent current
Inputs
Current consumption
Length of connection cable
Monitoring
Relays
Contact rating
monitoring relay
Connection terminals
Ambient temperature
Storage temperature
Rel. humidity
Protection rating
Weight:
Dimensions (w x h x d)
Specification
VdS approval
Declaration of Performance
For further information and accessories refer to product catalogue and documentation of the devices.
TI 798960.GB0 / 04.20
transponder Special detector (SD) (Part No. 808623.40)
Features
4 detector zone inputs
•
Conventional connection of special detectors
•
2 programmable relay outputs for resetting the special detector with
•
flexible reset times
• Integrated loop isolator
Loop monitoring acc. EN 54-13
•
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
Periphery components for ESSER FACP
8 V DC ... 42 V DC
approx. 90 µA @ 19 V DC
10 V DC ... 28 V DC
max. 120 mA @ 12 V DC
approx. 12 mA @ 12 V DC
max. 25 mA @ 9 V DC
max. 1.000 m
EOL-I or 10 kΩ / ±40%
max. 30 V DC / 1 A
EOL-O or 10 kΩ / ±40%
max. 1,5 mm² (AWG 30-14)
-10 °C ... +50 °C
-25 °C ... +75 °C
≤ 95% (no condensation)
IP 40 (with housing)
approx. 28 g
82 x 72 x 20 (mm)
EN 54-17 : 2005
G 210020
DoP-21057130701
81