Honeywell ESSER FACP Technical Information page 2

Periphery components for ESSER FACP
Intended purpose
This products may be used only for the applications outlined in the catalogue and in the technical description,
and only in conjunction with the recommended and approved external devices and components.
This documentation contains registered and unregistered trademarks. All trademarks are the property of the
respective owners. The use of this documentation does not grant you a licence or any other right to use any
name, logo or label referred to or depicted herein.
This documentation is subject to the copyright of Honeywell. The content must not be copied, published,
modified, distributed, transmitted, sold or changed without the express prior written permission of Honeywell.
The information contained in this documentation is provided without warranty.
Safety-related user information
This manual includes information required for the proper use of the products described.
In order to ensure correct and safe operation of the product, all guidelines concerning its transport, storage,
installation, and mounting must be observed. This includes the necessary care in operating the product.
The term 'qualified personnel' in the context of the safety information included in this manual or on the product
itself designates:
project engineers who are familiar with the safety guidelines concerning fire alarm and extinguishing systems.
•
trained service engineers who are familiar with the components of fire alarm and extinguishing systems and
•
the information on their operation as included in this manual.
trained installation or service personnel with the necessary qualification for carrying out repairs on fire alarm
•
and extinguishing systems or who are authorised to operate, ground and label electrical circuits and/or safety
equipment/systems.
Symbols
The following information is given in the interest of personal safety and to prevent damage to the product
described in this manual and all equipment connected to it.
Safety information and warnings for the prevention of dangers putting at risk the life and health of user and
maintenance personnel as well as causing damage to the equipment itself are marked by the following
pictograms. Within the context of this manual, these pictograms have the following meanings:
Warning - Designates risks for man and/or machine. Non-compliance will create risks to man
and/or machine. The level of risk is indicated by the word of warning.
Note - Important information on a topic or a procedure and other important information.
§
Standards and guidelines - Observe configuration and commissioning information in accordance
to the national and local requirements.
Dismantling
In accordance with Directive 2012/19/EU (WEEE), after being dismantled, electrical and electronic
equipment is taken back by the manufacturer for proper disposal.
© Honeywell International Inc./technical changes reserved!
This documentation is subject to copyright law and, as per Sections 16 and 17 of the German Copyright Act
(UrhG), is neither permitted to be copied nor disseminated in any other way. Any infringement as per Section
106 of the UrhG may result in legal action.
2
TI 798960.GB0 / 04.20