Esserbus ® Transponder - Honeywell ESSER FACP Technical Information

Periphery components for ESSER FACP
12 esserbus ®
The esserbus ® transponders enable conventional technology and the esserbus
used for different activations.
E.g. "alarm transponder" which is used for both the connection of non-addressable detectors (point-type
detectors, manual detectors and special detectors) as well as for the operation of conventional alarm signaling
devices (signaling devices, signal flasher and combination alarm signaling devices). The planning of the alarm
devices that can be connected is carried out via a calculation tool, which is part of the tools 8000 service and
programming software.
Monitoring of the lines in accordance with the latest standards is ensured via "EOL modules" (end-of-line
modules).
The IQ8FCT XS or LP can be used as a fire control transponder (FCT) for controlling and monitoring fire
protection equipment such as fire dampers, and as a technical alarm module (TAL) for monitoring an external
switching contact.
These modules with low power consumption are for interfacing to other disciplines which are not a part of the
fire detection system itself. Thanks to their intelligent concept they significantly expand the range of monitoring
and control functions as part of the building management.
Part No.
808623
808623.10
808623.40
808610.10
808611.10
808613.30
808619.10
808606
808621
804867
804868
Part No.
808624
808626
808626.10
804870
788612
788603.10
788600
788650.10
788601
788651.10
781336
M200SMB
SMB6-V0
78
transponder
Description
esserbus ® alarm transponder
esserbus ® transponder for UniVario
esserbus ® transponder SD for Special detector
esserbus ® transponder 12 relays
esserbus ® transponder 32 LED
®
esserbus transponder Standard Interface Extinguishing (SIE)
esserbus ® FSA transponder for fire doors
esserbus ® transponder IQ8FCT XS
esserbus ® transponder IQ8FCT LP, 230 V AC
esserbus ® transponder IQ8FCT
Technical alarm device IQ8TAL
Accessories
End-of-line element EOL-O - for alarm devices
End-of-line element EOL-I - detector zone termination
End-of-line element EOL-UV
Alarm and monitoring module for IQ8TAM, IQ8TAL, IQ8FCT XS and LP
Loop isolator
Module housing for top-hat mounting rail
Housing surface mount, grey
Housing surface mount, white
Housing flush mount, grey
Housing flush mount, white
DC/DC converter Output voltage 12 V DC
Module h surface mounting
ousing
Module h surface mounting of up to 6 esserbus
ousing
® to be connected. They are
® transponder IQ8FCT XS
TI 798960.GB0 / 04.20