Table of Contents
Advertisement
122
∅ 114
∅ 5
Fig. 6: Dimensions
5
6
Fig. 7: Detector removal lock
TI 798960.GB0 / 04.20
Dimensions and fixing holes
24
62
3
Detector removal lock
The detector removal lock is present in all bases as
standard and must be activated by the installer. In
2
order to do this, remove the lock
of the base and put into position
linkage
4
not possible to dismantle the detector using the
detector picker if the detector removal lock is in use.
To remove the detector, press the lock on the
opening of the housing
detector
Periphery components for ESSER FACP
in the detector using a suitable knife. It is
4
carefully and unscrew the
5
.
6
from the bottom
2
. Detach the pull
3
25
Advertisement
Table of Contents
