Trouble Reminder; Banner - Honeywell Fire-Lite Alarms MS-9600 Manual

Programming
See Page

BANNER

1=FACTORY
2=USER DEFINED
Banner Screen
82

3.6.5.1 Trouble Reminder

The Trouble Reminder features causes the control panel piezo to sound a reminder
'beep' for alarms and troubles, after the panel has been silenced. Refer to "System
Setup" on page 81, for a detailed description of this feature. Pressing 1 while
viewing System Setup Screen #1 will cause the display to toggle to Trouble Rem
On, which enables this feature. Each press of the 1 key will cause the display to
toggle between Trouble Rem On and Trouble Rem Off.
3.6.5.2 Banner
The top line of the display, which appears when the control panel is in normal mode,
can be changed by using the Banner option. Pressing 2 while viewing System Setup
Screen #1 will cause the following to be displayed:
1=FACTORY
2=USER DEFINED
Banner Screen
Pressing 1 while viewing the Banner Screen will select the factory default banner
setting and display the following screen:
FACTORY BANNER
FIRE LITE ALARMS INC
Factory Banner Screen
Pressing the Enter key will store this selection in nonvolatile memory and return the
display to the Banner Screen.
Pressing 2 while viewing the Banner Screen will display the following screens :
USER DEFINED BANNER
PRESS ENTER IF OK
User Defined Banner Screen #1
USER BANNER - LINE 2
PRESS ENTER IF OK
************
User Defined Banner Screen #2
BANNER
Master Programming Level
MS-9600 PN 51335:E1 2/14/08