Honeywell Fire-Lite Alarms MS-9600 Manual page 71

Master Programming Level
EDIT CONTROL
1=ENABLED
2=TYPE
3=SILENCEABLE
Edit Control Screen #2
MS-9600 PN 51335:E1 2/14/08
Type
To select the type of control module being programmed, press the 2 key while
viewing the Edit Control Screen #2. This will cause the control panel to display the
following Control Type Screens:
CONTROL TYPE
1=FUTURE USE
2=BELL-CIRCUIT
3=HORN-CIRCUIT
Control Type Screen #1
CONTROL TYPE
1=SOUNDERS
2=RELAY-1FC
3=STROBE-CKT
Control Type Screen #2
CONTROL TYPE
1=CONTROL
2=RESETTABLE POWER
3=FUTURE USE
Control Type Screen #3
While viewing one of the Control Type screens, select the type of control module
being programmed by pressing the corresponding keypad number key. The display
will return to the Edit Control Screen #2 and indicate the new type selection.
Notes:
1. A control module set to the Resettable Power type will follow the main circuit
board 24 VDC resettable power unless the control module is disabled.
The following table contains control module type codes and their functions:
Control Type
Future Use
Bell Circuit
Horn Circuit
Sounders
Relay
Strobe Circuit
Control
Resettable Power
Future Use
Special Function
None
None
None
None
Ignore Open Circuit
None
None
None
None
Programming
71