Honeywell Fire-Lite Alarms MS-9600 Manual page 58

Programming
1=STANDARD ADJECTIVE
2=STANDARD NOUN
3=CUSTOM ADJECTIVE
4=CUSTOM NOUN
Noun/Adjective Screen
EDIT DETECTOR
1=NOUN/ADJECTIVE
2=DESCRIPTION
Edit Detector Screen #5
58
Pressing 3 or 4 while viewing the Noun/Adjective Screen will display screens
similar to the previous Adjective and Noun Screens. The new screens will list
custom Adjectives and Nouns which have been programmed into the control panel
using the PK-CD programming kit. These descriptors are selected as described in
the previous sections.
Description
The Description selection allows the programmer to enter additional information
about the detector currently being programmed. This information will be displayed
as part of the device label on the display. Pressing 2 while viewing Edit Detector
Screen #5 will cause the following screen to be displayed:
DESCRIPTION
1=NOUN/ADJECTIVE
********************
Adjective/Noun Screen
A flashing cursor will appear at the first asterisk to the left. The programmer can
enter additional descriptive information about the device being programmed. This
information will appear on the display along with the standard device label
information.
A maximum of 20 characters (including spaces) can be entered. To enter
alphanumeric characters from the keypad, repeatedly press the appropriate key until
the desired character is displayed in the first position. For example, to enter the
letter B, press the 2 (ABC) key three times to toggle through the characters 1, A and
B. Press the right arrow key to move the cursor one position to the right and repeat
the process to enter the next character. To enter a space, press the * (QZ) key four
times until a blank appears in the desired position. When all characters have been
entered, press the Enter key to store the information. The display will return to the
Edit Detector Screen #5, displaying the new information at the bottom of the screen.
Recall/Increment Function
In addition, the user may use the Recall/Increment function at any time when the
cursor is on the first letter of the Description, Adjective or Noun field as follows:
• If the zero key is pressed, a 0 is placed in the first letter position
• If the zero key is then pressed a second time with no intervening key actions, the
entire field is replaced with the field entered for the previous device programmed,
and the cursor moves to the last character of the field (Recall function). The
Recalled Adjective or Noun field may now be changed letter-by-letter
• If the zero key is pressed again with no other intervening key actions and the last
character in the field is a number 0-9, the number is incremented by one. If the
last character is a letter, it changes to a 0. If the last character goes from 9 to 0
and the characters to the left of the last character are also numbers, they are also
incremented (overflow)
• The above increment function may be repeated with each press of the zero key
Master Programming Level
1D002
MS-9600 PN 51335:E1 2/14/08