Honeywell Fire-Lite Alarms MS-9600 Manual page 64

Programming
Monitor Type
Pull-Station
User-Defined-1
Waterflow
User-Defined-2
Monitor
User-Defined-3
Future
Future
Smoke-Conventional
User-Defined-5
Heat-Conventional
User-Defined-6
Medic-Alert
User-Defined-7
Hazard-Alert
User-Defined-8
Tornado-Alert
User-Defined-9
Future
Future
Tamper
User-Defined 11
Supervisory
User-Defined 12
Supervisory-AR
User-Defined 13
Power-Monitor
User-Defined 14
Trouble-Monitor
User-Defined-15
Process-Monitor
User-Defined 16
Process-Monitor-AR
User-Defined-17
Future
Future
Ack-Switch
Sil-Switch
Reset-Switch
Drill-Switch
PAS-Bypass
Future
64
Monitor module type selection will affect the function of the point as follows:
Table 3.1 Monitor Types
Action When Activated
Fire Alarm
same as previous (Pull-Station)
Fire Alarm Delayed
same as previous (Waterflow)
Fire Alarm
same as previous (Monitor)
not used
not used
Fire Alarm
same as previous (Smoke-Conventional)
Fire Alarm
same as previous (Heat-Detector)
Supervisory, latching
same as previous (Medic-Alert)
Supervisory, latching
same as previous (Hazard-Alert)
Supervisory, latching
same as previous (Tornado-Alert)
not used
not used
Supervisory, nonlatching (tracking)
same as previous (Tamper)
Supervisory, latching
same as previous (Supervisory)
Supervisory, nonlatching (tracking)
same as previous (Supervisory-AR)
Power Fault
same as previous (Power Monitor)
Trouble
same as previous (Trouble Monitor)
Piezo
same as previous (Process-Monitor)
Piezo, nonlatching (tracking)
same as previous (Process-Monitor-AR)
not used
not used
Acts like panel Acknowledge Key
Acts like panel Silence Key
Acts like panel Reset Key
Acts like panel Drill Key
PAS Disable
not used
Note: For the PROCESS-MONITOR-AR selection, AR refers to AutoResettable
Master Programming Level
MS-9600 PN 51335:E1 2/14/08