6: Nac; 7: Relays - Honeywell Fire-Lite Alarms MS-9600 Manual

Operating Instructions
READ STATUS
1=RELAYS
2=PROGRAM CHECK
3=HISTORY
Read Status Screen #3
128
4.22.6 NAC
Pressing 3 while viewing Read Status Screen #2 will display the following screen:
1=NAC 1
2=NAC 2
Note that 3=NAC 3 and 4=NAC 4 will only be displayed if the NACKEY NAC option
card is installed, in JP8 of the main circuit board, for Class B operation.
The operator can press 1 to view the programmed options for NAC 1, 2 to view the
programmed options for NAC 2, 3 to view the programmed options for NAC 3 or 4 to
view the programmed options for NAC 4. The resulting screens will display the
following information:
• Enable/Disable Status
• Circuit Type (Bell, Strobe, etc.)
• Silenceable/Nonsilenceable
• Auto Silence Enable/Disable and time delay
• Coding Selection (Temporal, Steady, etc.)
• Zone Assignments
• Silence Inhibit Enabled/Disabled
• Synchronization Type (System Sensor, Wheelock or Gentex)
4.22.7 Relays
Pressing 1 while viewing Read Status Screen #3 will display the following screen:
1=RELAY 1
2=RELAY 2
3=RELAY 3
The operator can view the programmed option for each relay by pressing the
corresponding number key.
NAC
3=NAC 3
4=NAC 4
RELAYS
MS-9600 PN 51335:E1 2/14/08
Read Status