Hht35S Ignition Coil / Clutch Shoe / Flywheel - Honda HHT25S Manual

STARTER PULLEY/ CLUTCH / IGNITION COIL / FLYWHEEL

6. HHT35S IGNITION COIL / CLUTCH SHOE / FLYWHEEL

IGNITION COIL DISASSEMBLY/
REASSEMBLY
CLUTCH SHOE/FLYWHEEL DISASSEMBLY/REASSEMBLY
8 mm CLUTCH WASHER (2)
INSTALLATION:
Note the installation direction.
FLYWHEEL
SIDE
7-12
SHROUD
CUTOUT
IGNITION
HIGH TENSION
INSPECTION: P. 7-5
CORD CLIP
ADJUSTMENT: P. 7-6
FLYWHEEL
DISASSEMBLY/REASSEMBLY: P. 7-4, 5
Take care not to bend or break the fins
during disassembly and reassembly.
8 mm FLANGE NUT
23 N•m (2.3 kg•m, 17 ft•lb)
Apply to the
threads.
CLUTCH
CLUTCH ASSEMBLY
SIDE
DISASSEMBLY/
REASSEMBLY:P. 7-4
INSPECTION: P. 7-5
HIGH TENSION CORD
REASSEMBLY:
• Attach the plug cap in
the direction as shown
in the figure.
• Attach the high tension
cord to the high tension
cord clip so that there is
no slack.
ENGINE STOP SWITCH WIRE
REASSEMBLY:
Attach the engine stop switch
wire to the cutout of the shroud
so that there is no slack.
4 x 14 mm
SOCKET BOLT (2)
3.4 N•m (0.35 kg•m,
P. 7-14
P. 7-15
P. 7-13
FAN COVER
P. 7-14
HHT25S•HHT35S
30 in•lb)
WAVE WASHER (2)
INSTALLATION:
Note the installation direction.
CLUTCH SIDE
8 mm CLUTCH BOLT (2)
15 N•m (1.55 kg•m, 11 ft•lb)
5 x 20 mm
SOCKET BOLT (3)
6.4 N•m (0.65 kg•m, 57 in•lb)