Honda HHT25S Manual page 50
Hide thumbs
Also See for HHT25S:
- Owner's manual (36 pages) ,
- Owner's manual (32 pages) ,
- Owner's manual (32 pages)
Advertisement
HHT25S•HHT35S
METERING LEVER ADJUSTMENT
1. Install the metering body spring, inlet needle valve, metering
lever, metering lever pin, and the metering lever pin screw on
the pump body.
2. Measure the gap between the metering lever surface and the
pump body surface.
Specification
1.18 ~ 1.50 mm (0.046 ~ 0.059 in)
3. If the metering is outside the specification, adjust by bending
the metering lever.
AIR CLEANER / CARBURETOR
METERING LEVER
PUMP BODY
1.18 ~ 1.50 mm
(0.046 ~ 0.059 in)
5-5
Hide quick links:
Advertisement
