Honda HHT25S Manual page 63

RECOIL STARTER / FUEL TANK
4. HHT35S FUEL TANK
REMOVAL\INSTALLATION

WARNING
Gasoline is highly flammable and explosive.
You can be burned or seriously injured when handling
fuel.
• Keep heat, sparks, and flame away.
• Handle fuel only outdoors.
• Wipe up spills immediately.
Before removal, completely drain the fuel tank and fuel line.
FUEL RETURN TUBE (
REASSEMBLY:
Inspect for cracks or
deterioration before installation
and replace if necessary.
Verify that the tube is not bent
in the tank.
SERVICE BULLETIN #5 =>
FUEL TUBE GROMMET
INSTALLATION:
Insert the fuel tube and fuel return tube into the
grommet to the dimensions shown. Note that
engine failure can result if the dimensions do
not conform to the specifications shown. Take
care not to damage the grommet surface where
it contacts the tank. Replace the grommet if it is
damaged.
FUEL RETURN TUBE
90~96 mm
(3.5~4.2 in)
MATING
SURFACES
6-8
CUTAWAY VIEW OF A LOW-PERMEABILITY FUEL
TANK (See
FUEL TUBE (
REASSEMBLY:
Inspect for cracks or deterioration before
clear
)
installation and replace if necessary.
Verify that the tube is not kinked in the tank.
FUEL FILTER
CLEANING:
tube clip
fuel tank
FUEL TUBE
See
Pre-2010 year:
Low-perm horizontal type:
mm
80~86
(3.2~3.4 in)
Low-perm vertical type:
CLEANING:
REASSEMBLY: Clean the tank to remove foreign material and water
in the tank before installation.
page 1-2 for serial numbers)
OUTSIDE
WHITE
OFF-WHITE
WHITE
If a low-permeability fuel tank gets a
cut 1 mm or more deep, replace it.
black
)
P. 3-14 VALVE
RETAINER
page 1-2
for serial numbers
0.63 L (21.3 fl oz)
0.63 L (21.3 fl oz)
0.64 L (21.6 fl oz)
P. 3-14
HHT25S•HHT35S
1 mm
FUEL
TANK CAP
FUEL CAP
PACKING
TANK
MOUNTING
RUBBER (4)