Honda HHT25S Manual page 108

HHT25S•HHT35S
2. CUTTING-LINE HEADS
DISASSEMBLY/REASSEMBLY
5 x 12 mm
SELF-TAPPING SCREW
TORQUE: 3.0 N•m (0.30 kg•m, 27 in•lb)
KNIFE
DEBRIS SHIELD
INSTALLATION:
Check the debris shield
for cracks and damage.
Replace the debris shield
if it is cracked or damaged.
FRAME PIPE
INSTALLATION:
HHT25S: P. 11-2
HHT35S: P. 11-4

DRIVE CABLE
INSTALLATION: P. 11-14
5 x 25 mm
BOLT/WASHER (2)
TORQUE:
5.6 N•m (0.60 kg•m, 50 in•lb)
® Kwik Loader is a registered trademark of kpi Kwik Products, Inc.
5 x 28 mm
BOLT/WASHER (4)
TORQUE:
3.0 N•m (0.30 kg•m, 27 in•lb)
SPACER (2)
2.3 mm (3/32 in)
thick
SPACER B
(10 splines)
COVER PLATE/
SPACER A
(10 splines)
5 x 12 mm
BOLT/WASHER
TORQUE:
2.5 N•m (0.25 kg•m, 22 in•lb)
CUTTING ATTACHMENT / GEAR CASE
KWIK LOADER® CUTTING-LINE HEAD
REMOVAL/INSTALLATION:
P. 10-7
CUTTING LINE REPLACEMENT:
P. 10-7
MANUAL-FEED
CUTTING-LINE HEAD
REMOVAL/INSTALLATION:
P. 10-4
DISASSEMBLY/REASSEMBLY:
P. 10-5
CUTTING-LINE REPLACEMENT:
P. 3-5
SEMI-MATIC CUTTING-LINE HEAD
REMOVAL/INSTALLATION: REMOVAL/INSTALLATION: P. 10-5
DISASSEMBLY/REASSEMBLY:
DISASSEMBLY/REASSEMBLY: P. 10-4
CUTTING LINE REPLACEMENT:
CUTTING-LINE REPLACEMENT:
Use nylon monofilament line.
GEAR CASE
DISASSEMBLY/
REASSEMBLY: P. 10-9
INSTALLATION: P. 10-8
THREADED
COLLAR
WASHER (KWIK
LOADER HEAD ONLY)
P. 10-4
P. 10-6
P. 3-7
10-3