Honda HHT25S Manual page 107

CUTTING ATTACHMENT / GEAR CASE
DISASSEMBLY/REASSEMBLY
5 x 28 BOLT/WASHER (4)
5 x 28 mm BOLT/WASHER (4)
TORQUE:
TORQUE:
3.0 N•m (27 in•lbs)
3.0 N•m (0.30 kg•m, 27 in•lb)
DEBRIS SHIELD
INSTALLATION:
Check the debris shield
for cracks and damage.
Replace the debris shield
if it is cracked or damaged.
FRAME PIPE
INSTALLATION: P. 11-4
INSTALLATION: P. 11-10

DRIVE CABLE
INSTALLATION: INSTALLATION: P. 11-10 P. 11-14
5 x 25 mm BOLT/WASHER (2)
TORQUE:
5.6 N•m (0.60 kg•m, 50 in•lb)
5 x 12 mm BOLT/WASHER
TORQUE:
2.5 N•m (0.25 kg•m, 22 in•lb)
10-2
SPACER (2)
2.3 mm (3/32 in) thick
COVER PLATE/SPACER A
(10 splines)
GEAR CASE
DISASSEMBLY/
DISASSEMBLY/
REASSEMBLY: P. 10-9
REASSEMBLY: P. 10-7
INSTALLATION: P. 10-8
INSTALLATION: P. 10-6
HHT25S•HHT35S
10 x 1.25 mm LOCK NUT
(left-hand thread)
TORQUE:
20 N•m (2.0 kg•m, 15 ft•lb)
COVER
SPACER B
(10 splines)
BLADE
INSTALLATION: P. 10-1
Check the blade for wear
and damage. Replace the
blade with a new one if
necessary.
BLADE COVER
Leave installed on
the blade.