Honda HHT25S Manual page 28

HHT25S•HHT35S
CUTTER DOES NOT ROTATE
Check whether the clutch shoes are
worn out P. 7-6, P. 7-11.
Normal
Check the drive cable for damage
P. 11-14.
Normal
Check the gear case assembly for
damage.
CUTTER DOES NOT STOP
Throttle cable adjusted properly
Properly adjusted
Check the clutch assembly for damage
P. 7-8, P. 7-14.
Normal
Turn the clutch outer to check whether
the radial ball bearing of the clutch
housing or the axial section of the
clutch outer is damaged.
Worn out
Damaged
Damaged
Improperly
adjusted
P. 3-4.
Damaged
Damaged
SERVICE INFORMATION
Replace the clutch assembly
Replace the drive cable P. 11-14.
Replace the gear case assembly
Adjust the throttle cable P.
Replace the clutch assembly
Replace the radial ball bearing of the clutch
housing and the clutch outer
P. 7-6, P. 7-11.
P. 10-8.
3-4.
P. 7-6, P. 7-12.
P. 7-3, P. 7-11.
2-17